What You Need To Know About the HVAC Installation Process

HVAC installation is a complex matter, and there are many factors that you must consider before installing your new system. The procedure involves working with skilled technicians, innovative products, and specialized machinery.

A lack of proper knowledge about HVAC installation may cost you heavily in terms of money, comfort, and safety. That’s why addressing some crucial questions about the HVAC installation process is essential.

If you have more questions about HVAC installation or need your AC serviced, call us at (951) 336-1718. Your AC will run better in no time after dependable air conditioning service by Inland Empire Comfort.

When Should I Upgrade My System?

While upgrading your air HVAC system isn’t a month-long process, time is still a factor. Properly timing your installation is key to saving money when installing a new HVAC system.

If your HVAC system is over ten years old, it’s time to upgrade. An older unit may still cool your home, but after it passes the ten-year mark, the unit starts to lose effectiveness. By then, it has lost most of its energy efficiency because of regular wear and tear.

Planning your replacement during springtime will ensure your home is comfortable throughout the HVAC installation process. Your workers will also thank you.

Always Be Safe When Working On HVAC Systems

Safety is so important when working on HVAC systems, and you should take every precaution to ensure the safety of everyone involved in the installation process. Ensure everyone follows all proper procedures to prevent injuries before, during, and after working on HVAC systems.

Wear safety goggles and gloves, and use proper lifting techniques. Never drink alcohol while installing an AC system; ensure all your tools are in good condition before doing any work.

The Installation Process

The HVAC installation process is deceptively complex. Many tasks require advanced knowledge of the process and others require working in tight spaces, heavy lifting, and plenty of patience. If you feel you can’t do the work or are afraid to get in over your head, stop and call a licensed technician.

There are four major steps when installing a new HVAC unit.

Sizing the New System

The size of an HVAC system depends on the size of your home. In general, you want to ensure your HVAC unit is adequate for the dimensions of your living space. If you have a two-story house with a basement and attic, you need more cooling power than if you just have a single floor.

Technicians and manufacturers measure cooling power in BTUs. You’ll need an AC with more cooling capacity or BTUs if you have a larger home. If your AC is too small, it won’t cool your home properly and will eventually break down from the strain of overworking itself.

Checking and Upgrading Ductwork

Your home may have inferior air quality if you have poor ductwork. Check the ductwork to ensure it’s in good condition. If you need to replace any ductwork, do so before installing the HVAC unit.

Also, ensure that the ductwork is adequately insulated for energy efficiency and does not leak air from improper insulation.

Installing the HVAC Unit

Next comes installing the actual HVAC unit. This step requires some heavy lifting, so make sure you have a few people available or a lift to help with the load. You may also have to check or run wiring, solder/braze new copper lines, and fit the new unit to old ductwork.

Make sure your unit is in a good location. You don’t want to spend thousands of dollars on a new HVAC for it not to fit on the original site!

Check and Troubleshoot the Unit

The final step of the HVAC installation process is to check the unit and its installation. Check for refrigerant leaks or problems with the evaporator or condenser so the unit doesn’t trip any breakers.

Recheck the ductwork for air leaks, and ensure the unit runs as intended.

Keep Your New AC Cooling Properly

The HVAC installation process is vital to the longevity of your heating and cooling system. Improperly installed HVAC units are loud, inefficient, and even dangerous. Always check the quality of their work before settling on a contractor.

Have a qualified technician install your system to guarantee your family stays safe and comfortable all year. You should also know the importance of having the correct AC temperature in summer. Call Inland Empire Comfort today at (951) 336-1718 to schedule your service or installation.